Contamination and dirt on the motorcycle can cause scratches during the shampoo wash (hand wash). We recommend using the S100 Power Bike Shampoo as a pre-cleaner with a foam sprayer or foam lance and for subsequent hand wash as a shampoo.

NEW FOAM TECHNOLOGY: Dynamic changes to the foam bubbles ensure a micro-mechanical cleaning effect. This loosens the dirt from the surface actively, binds it to the foam and removes it from the surface.

• Extremely powerful cleaning performance
• Very gentle on all surfaces
• Does not remove wax and sealing coats

Rinse coarse dirt off with a large amount of water.

• Using the foam hose (pressure washer): Fill the product into the tank undiluted.
• Using the foam sprayer: Add 1.5 to 2 caps (one cap = 30 ml) to 1 L water.

Apply the foam to the motorcycle and wait for 2 to 3 minutes for it to take effect. Then rinse
thoroughly with clean water.

Using as a shampoo (hand wash): Place 2 to 3 caps to a bucket and add 5 L water to foam it up.

Wash the motorcycle from top to bottom with a S100 The Wash Mitt or the S100 The Sponge. Then
rinse thoroughly with clean water and dry the motorcycle.

Tip: The two-bucket method is ideal for gentle hand washing. One bucket with clean water and the
second filled with water including a suitable cleaning agent.